Search This Blog

Saturday, July 13, 2019

SPR-45 Automatic SMT Stencil Printer

The Gold-Print SPR-45 from Stencils Unlimited is automated with its power sweep squeegee and power frame lift for higher volume runs.

SPR-45 Automatic SMT Stencil Printer

SPR-45 Automatic SMT Stencil Printer

Useful for the fine pitch applications, these have friendly precision controls that make operation of these systems simple and easy.
Some Specs
  • Linear squeegee guide automatic
  • Adjustable power sweep squeegee for single or dual passes
  • adjustable angle of attack
  • Adjustable dual squeegee pressure/speed pneumatic/manual
Stencils Unlimited, LLC
10191 SW Avery Street, Tualatin, OR 97062, USA

Wednesday, July 10, 2019

6309POT pH ORP Controller - Global Water

The 6309POT pH/ORP Analyzer and Controller is an easy to use instrument that measures, analyzes, and controls pH, ORP, and temperature.

The 6309POT’s built-in temperature and automatic temperature compensation (ATC) functions may be used with an ATC-type sensor or with a 10K ohm thermistor.

6309POT pH ORP Controller - Global Water

The Global Water 6309POT multiparameter pH/ORP Controller measures, analyzes, and controls pH, ORP and temperature in one easy to use unit.  The pH/ORP Controller's setup and calibrations are done through a user-friendly menu that may be password protected.

Calibrations can be performed quickly and accurately with automatic buffer recognition of U.S. or European buffer sets, with the values stored in the pH/ORP Controller's nonvolatile memory.  A large backlit display on the pH/ORP Controllers provide pH, ORP, and temperature plus the current mA output and relay status.

Global Water, founded in 1990, is a manufacturer, distributor, and systems integrator of water instrumentation serving the water, wastewater, and environmental markets.

Global Water Instrumentation
PO Box 9010, College Station, TX   77842, USA.

Wednesday, July 3, 2019

GB300 Portable Percent Oxygen Analyzer - Teledyne AI

Lightweight and easy to use, the GB300 incorporates Teledyne's own Micro-fuel Cell sensor for quick and accurate analysis of oxygen.

GB300 Portable Percent Oxygen Analyzer - Teledyne AI

Constructed of high impact resistant materials, the GB300 provides unparalleled performance under the harshest conditions. The unit is powered by 3 AA batteries which should last for at least 2000 hours of use.

GB300 Portable Percent Oxygen Analyzer - Teledyne AI

Features Include
  • Teledyne's own R-17D sensor
  • Measuring range: 0-100% oxygen
  • Sensor cable: Extends to 10 feet (3m)
  • Signal output: 0-1 VDC
  • RFI hardened: Yes
Teledyne Gas and Liquid analyzers
"Teledyne designs and manufactures sensors, gas and liquid analyzers, and custom systems which combine over 50 years of expertise in electronics, chemistry and engineering."

Monday, June 10, 2019

PM880 Hygrometer from IMA UK

These hygrometers are small, lightweight, and easy to use. The large LCD displays moisture readings in dew point (°C or °F), ppmv, ppmw, lb/MMSCF, and a variety of other unit options. Data can be viewed in alphanumeric or graphic formats.

PM880 Hygrometer from IMA UK

PM880 Hygrometer from IMA UK

Features Include
  • Hand-held portable design
  • Internal data logger
  • IrDA communication with PC
  • Stores up to 60 log/site files
  • Simple programming via graphic user interface
  • Compatible with all GE moisture probes
IMA UK - Moisture and Dewpoint Measurement
"Established in 1991 to be specialists in Moisture Measurement, IMA have rapidly become known as experts in Hygrometry and Watercut systems."

Thursday, June 6, 2019

K2 Series High Capacity Cells - Maxwell

The K2 Series ultracapacitors are a third generation design that provides 2.7 volt operating voltage while improving Maxwell's high performance and high reliability on a high volume manufacturing platform.

K2 Series High Capacity Cells - Maxwell

This type of caps are also an ideal source of back-up power. It can provide extended power availability, allowing critical information and functions to remain available during dips, sags, and outages in a power supply or battery change.

K2 Series High Capacity Cells - Maxwell

The K2 2.7V series works in tandem with batteries for applications that require both a constant power discharge for continual function and a pulse power for peak loads. In these applications, the ultracapacitors relieve batteries of peak power functions, resulting in extended battery life and a reduction in overall battery size and cost.

Maxwell - Energy and Power Delivery Solutions

Maxwell Technologies, Inc.
3888 Calle Fortunada, San Diego, CA, 92123, USA

Monday, May 13, 2019

CL3515R - Calibrator Thermometer Omega

Portable calibrator/thermometer with a 4-digit LCD. It is designed to use external  thermocouples as temperature sensors. The thermometer features a dual thermocouple input and an adjustable thermocouple offset.

CL3515R - Calibrator Thermometer Omega

CL3515R - Calibrator Thermometer Omega

Features Include
  • USB and RS232 Interface with Windows Software
  • Display: 4-digit LCD with max reading of 19999
  • Input Connector: Miniature thermocouple connector (SMP type)
  • Power: 9V battery - 17.5 hours nominal with low-battery indicator
  • NIST-Traceable Calibration Certificate with 13 Data Points
from Omega

Liquid dosage with Flow meter - Bronkhorst

The LIQUI-FLOW series L10I/L20I digital Liquid Flow Meters / Controllers for low flow ranges are equipped with a rugged 'industrial style' (IP65) pc-board housing for use in industrial environments. The instruments operate on a thermal, thru-flow measuring principle.

Liquid dosage with Flow meter - Bronkhorst

The digital LIQUI-FLOWTM Mass Flow Meter was designed to cover the range between 5 and 1000 g/h (Full Scale) in a compact instrument with a fast response. The Flow Meter is basically a stainless steel tube without any moving parts or built-in obstructions.

Liquid dosage with Flow meter - Bronkhorst

Flow control is achieved by integrating a control valve onto the body of the Liquid Flow Meter, or by mounting it as a separate component (in IP65 configuration)
    Bronkhorst High-Tech B.V., the European market leader in thermal Mass Flow Meters/Controllers and Electronic Pressure Controllers, has many years experience in designing and manufacturing precise and reliable measurement and control devices.

    Monday, May 6, 2019

    MZS Single Phase Noise Filter - TDK Lambda

    MZS is an EMI RFI Filter for equipment designed to conform EMI regulations such as VCCI, CISPR, FCC, EN, etc. These are mounted within Control Panels or Cabinets. Metal Enclosures that are grounded are Ideal for use along with this filter.

    MZS Single Phase Noise Filter - TDK Lambda

    MZS Single Phase Noise Filter - TDK Lambda

    Swicth Boards and Meter Boxes also can use this for lines going to Sensitive Equipment. These along with MCB and ELCB make Mains Power Safer and Cleaner. - delabs

    Features Include
    • Attenuation effect against high voltage pulse noise.
    • Attenuates conductive emission from power supply.
    • Leakage current:1mA max..(250V,60Hz)
    • Rated Current - 6-20A Type Numbers
    • Leakage Current 1mA max at AC250V 60Hz
    from TDK Lambda

    TDK-Lambda Corporation
    3-9-1, Shibaura, Minato-ku, Tokyo 108-0023, JAPAN

    Tuesday, April 16, 2019

    LUXEON Rebel White - Philips Lumileds

    LUXEON Rebel LEDs are designed for a wide range of lighting applications and available in specifi Correlated Color Temperatures (CCT) and Color Rendering Index (CRI) combinations, flux and CCT combinations and even specified efficacy.

    LUXEON Rebel White - Philips Lumileds

    LUXEON Rebel White - Philips Lumileds

    Electrical Characteristics at 350 mA for LUXEON Rebel - Thermal Pad Temperature = 25ºC
    Part No - LXM3-PW71
    • Nominal CCT - 3000K
    • Typical CRI - 85
    • Typical Luminous Flux - 77 lm
    • Forward Voltage Vf - Typ - 3.00 V
    • Color Temperature - CCT - 3045K
    • Typical Viewing Angle - 120 Degrees
    Correlated Color Temperature (CCT) - The phrase use to describe the temperature at which a Planckian Black Body Radiator and an illumination source's appear to match, usually specified in Kelvin (K).

    CRI or Color Rendering Index - The calculated rendered color of an object. The higher the CRI (based upon a 0-100 scale), the more natural the colors appear. Natural outdoor light has a CRI of 100. Common lighting sources have a large range of CRI.

    Flux - The sum of all the lumens (lm) emitted by a source (see lumen).

    From - Philips Lumileds Lighting Company

    Multifunction Preset Counter - H7CX-A - Omron

    1-stage preset counter, 1-stage preset counter with total counter (selectable). Power supply circuit and input circuits are isolated inside the Counter/ Tachometer. Previous non-isolated counters had wiring restrictions and could be damaged if wired incorrectly. The H7CX removes these worries.

    Multifunction Preset Counter - H7CX-A - Omron

    Twin Counter Mode (One Unit, Two Counters) - A Twin Counter Mode has been added to enable using two counters with only one unit. Tachometer Function, Prescaling function and Decimal point adjustment.

    Multifunction Preset Counter - H7CX-A - Omron

    The output counter counts the number of times the output turns ON (alarms can be displayed and the count can be monitored in increments of 1,000 operations). This counter is useful in managing the service life of the Counter/Tachometer or the load.

    Tuesday, April 9, 2019

    Handy Calibrator Model CA51 - Yokogawa

    The CA71 Handy Calibrator is a small, lightweight, multifunction calibrator that can simultaneously source and measure voltage, current, resistance, TC, RTD, frequency, and pulse signals.

    Handy Calibrator Model CA51 - Yokogawa

    Handy Calibrator Model CA51 - Yokogawa

    Simultaneous signal generation and measurement capability:

    The CA71 lets you handle regular tests on TCs, RTDs and various other types of sensors and instruments, as well as operation checks when a problem has occurred (TC and RTD measurement functions are CA71 only.)

    AC voltage (including supply voltage) measurement capability:

    In cases where numerous signal converters and other devices are mounted on a rack or panel, the Handy Calibrator can be used to check the input and output signals of each device, while simultaneously checking the power supply.

    Tuesday, February 12, 2019

    MC4 Documenting Process Calibrator - Beamex

    Multifunction calibrator, MC4 is suitable for calibrating various process parameters, such as pressure, temperature and electrical signals. Calibration results are automatically stored in the MC4's memory. Data upload to PC using Beamex CMX Calibration Software is possible.

    MC4 Documenting Process Calibrator - Beamex

    MC4 Documenting Process Calibrator - Beamex

    High accuracy is one of the important features of the MC4. A standard feature of the MC4 includes an accredited calibration certificate as proof of its accuracy. The correction coefficients of a PRT probe can be programmed into the MC4 to further improve temperature accuracy.

    Monday, February 11, 2019

    34405A Digital Multimeter DMM - Keysight

    The 34405A features simultaneous reading of DC and AC measurements with its dual display and can take up to 19 readings/sec at 4½ digit resolution through the standard USB interface..

    34405A Digital Multimeter DMM - Keysight

    The 34405A comes with a broad range of measurement functions, including temperature and capacitance measurements.

    34405A Digital Multimeter DMM - Keysight

    For those with a need to control and take preset measurements with a PC, the built-in USB 2.0 interface provides an easy and robust connection between the PC and DMM.

    The USB interface connects directly to the PC host and works seamlessly with Keysight Connectivity software and can be controlled remotely via industry standard SCPI commands or through DMM Intuilink Connectivity software.

    Wednesday, January 16, 2019

    Fluke Ti32 Thermal Imager for Industries

    The new Fluke Ti32 combines a powerful 320x240 sensor into the award winning, rugged design of the Ti25 and Ti10, delivering the first industrial grade, high performance thermal imager.

    Fluke Ti32 Thermal Imager for Industries

    No need to carry pen and paper-record findings by speaking into the imager. Voice annotations can be recorded with every image you take. Decide for yourself, Amazing Fluke Instrument Test. Thermal imagers from fluke. Ti32 Infrared Camera survives a 2 meter drop - without a scratch.

    Fluke Ti32 Thermal Imager for Industries

    One-handed focus capability, emissivity correction, reflected background temperature compensation, and transmission correction increase the accuracy of measurements in most situations

    Specifications -

    Temperature measurement range (not calibrated below -10 °C) -20 °C to +600 °C (-4 °F to +1112 °F)

    Detector type 320 X 240 Focal Plane Array, uncooled microbolometer

    Thermal sensitivity (NETD) ≤ 0.045 degrees C and 45 mK

    Infrared spectral band 7.5 μm to 14 μm (long wave)

    Thursday, January 10, 2019

    pH 2700 Benchtop Meter- OAKTON Instruments

    Measures pH, ORP (mV/Rel. mV), and temperature(°C or F). The large display is easy to read even at a distance and features stability indication. The meter includes auto-buffer recognition for both USA and NIST pH buffer sets, automatic or manual temperature compensation, temperature in °F or °C, and display Hold.
     
    pH 2700 Benchtop Meter- OAKTON Instruments

    Each meter includes a convenient slide-out calibration card for quick reference. All models (except for DO 2700) include an electrode arm and metal bracket which can be easily attached to the left or right side of the meter according to your preference.

    pH 2700 Benchtop Meter- OAKTON Instruments

    Some Features
    • pHRange -2.000 to 20.000
    • mVRange -2000.0 to 2000.0
    • TemperatureRange 32 to 212°F (0.0 to 100.0°C)
    • Up to 500-point memory with date-time stamp for GLP
    • Calibration-due alarm let you know when to recalibrate
    • Audible alarms alert you when reading fall out of range
    • Output data to either printer or PC
    From - OAKTON Instruments

    Thursday, January 3, 2019

    PoScope mega 1 from PoLabs

    PoScope Mega1 is lowest power consumption USB oscilloscope, function generator and logic analyzer in one on the market. It draws only 60mA thus the best choice for measurement environments which demands power autonomy and longevity.

    PoScope mega1 from PoLabs

    Integrated high quality analog to digital converters are able to sample up to 2,5MS/s and with maximum data resolution of 10mV at +/-20V input range.

    PoScope mega 1 from PoLabs

    Function generator is capable of generating different pattern test signals with frequency up to 12,5kHz and maximum amplitude of 1,8V. Logic analyzer captures up to 16 digital inputs and gathers data for further analysis. Included free software PoScope4 extends it’s usability for many different applications.

    The PoScope4 software is multithreaded Windows application which enables usage of single or multiple PoScopeMega1 devices at same time. It’s core is based around plugin technology thus users can connect to it any measurement device by PoLabs. Parallel processing unit provides fast and smooth data acquisition and graphics drawing.

    Electronic Parts