Friday, July 6, 2018

Minidatalogger HD207 - Delta OHM

Stable and Reliable monitoring of temperature and relative humidity. Delta Log2 software helps record and analyze the recorded data in a PC. The datalogger functions of Start, Stop, Configuration, Data Download and Logging Interval can be selectable either from instrument or computer.

Minidatalogger HD207 - Delta OHM

Logging Capacity - 240K for one channel, 120K for two channels, 80K for 3 ch.
PC Interface Through a passive optoisolated RS232 serial port, 9600 bauds
Reading Interval Selectable among 1, 5, 10, 15, 30sec, 1, 5, 10, 15, 30min, 1hour.

Minidatalogger HD207 - Delta OHM

Typical applications are: monitoring of temperature/humidity during transportation, storage of
fresh or frozen foods, fruit, vegetable products and flowers, pharmaceuticals, sensitive and photographic products, paper, explosives, as well as laboratory activities in general.

Delta OHM - Process and Environmental Instruments

Electronic instruments for the measuring of the following parameters: Temperature, Relative Humidity, Pressure, Light, Acoustics, pH, Conductivity, Dissolved Oxygen and Wind speed.

Delta Ohm S.r.L.
Via G.Marconi, 5 - 35030 Caselle di Selvazzano, Padova (PD) ITALIA

Tuesday, July 3, 2018

iDVM a Wireless DMM - Redfish Instruments

A digital multimeter that wirelessly transmits voltage, current and resistance measurements via an 802.11 wifi connection to any Android device for enhanced visualization, data sharing, and data logging.

iDVM a Wireless DMM - Redfish Instruments 

Users can acquire data, save it, email it, post it to a web server, or display it for further visualization. Using the integrated speech function, the iDVM can “speak” the measurement through your Phone or Tablet.

The iDVM 510 is a fully-featured professional multimeter, so you can use it as your everyday multimeter for taking all the measurements you require. But the advantage of using the iDVM is that it connects over Bluetooth-LE to your iOS or Android device to enable you to interact with your data and utilize it in ways that simply aren’t possible with a traditional multimeter.

iDVM a Wireless DMM - Redfish Instruments

The iDVM will permits you to measure voltage, current, and resistance from up to 30 yards away while still logging the data. Once you've captured the data you can use the many attributes of your Android devices to pinch, scroll, pan, and zoom your data.

Redfish Instruments, Inc.
1669 Peachwood Dr, San Jose, CA 95132

Monday, June 18, 2018

FSH Handheld Spectrum Analyzer

The R&S FSH spectrum analyzer is rugged, handy and designed for use in the field. Its low weight, its simple, well-conceived operation concept and the large number of measurement functions make it an indispensable tool for anyone who needs an efficient measuring instrument for outdoor work.

FSH Handheld Spectrum Analyzer - R&S

FSH Handheld Spectrum Analyzer

For example, it can be used for maintaining or installing transmitter systems, checking cables and antennas, assessing signal quality in broadcasting, radiocommunications and service, measuring electric field strength or in simple lab applications. The R&S®FSH can perform any of these tasks quickly, reliably and with high measurement accuracy.

From - Rohde & Schwarz International

Monday, June 11, 2018

Ultra High Resistance -Super Mox - Ohmite

High-voltage Super Mox resistors have been developed to meet the precision temperature stability requirements of high-accuracy and high-voltage systems.

Ultra High Resistance -Super Mox - Ohmite

Super Mox combines proprietary noninductive resistance system and design to achieve low temperature coefficient, low voltage coefficients, high stability and increased high operating voltages.

Super Mox Series – High Voltage Non Inductive Axial

Highlights
  • High Voltage Non Inductive Axial
  • Power rating 3.8-20 watts
  • Resistance range 1K -50 gig; up to 1 Tera ohm available
  • 0.05%-10% Tolerance
  • TCR values as low as 10ppm
  • Up 90KV voltage handling
  • Non-Inductive design
Ohmite Electronic components Power resistors

Ohmite Manufacturing Company has been a leading provider of resistors for high current, high voltage and high energy applications for over 80 years.

(I used 100 Giga Ohm and 1 Tera Ohm Glass Encased Victoreen Resistors and an Electrometer from Princeton Applied Research to calibrate my Insulation Tester TeraOhm - delabs)

Friday, June 8, 2018

Thermo Nicolet NEXUS 670 FTIR - GMI

High end optical bench which can be accessorized to do just about any analysis to the most rigorous of limits.

Thermo Nicolet NEXUS 670 FTIR - GMI

The optics are fully optimized and computer controlled for ease of use. Changing spectral range is as easy as removing an optical component and placing the new one into its position.

Thermo Nicolet NEXUS 670 FTIR - GMI

Features Include
  • 0.125 cm-1 spectral resolution
  • Continuous dynamic alignment
  • Automated continuously variable aperture
GMI provides high value laboratory instrumentation and service solutions to the clinical diagnostic, biotech, & chemical analysis laboratory marketplace worldwide.

GMI - Laboratory Instrumentation and Services
6511 Bunker Lake Boulevard, Ramsey, MN 55303, United States

Wednesday, May 9, 2018

USB-504 a 4–20 mA current loop logger from MC

Battery-powered with an USB Interface. Measures and stores up to 32,000 current loop readings over the 4 to 20 mA measurement range. The data can then be graphed, printed, and exported to other applications using the custom software provided.

USB-504 a 4-20 mA current loop logger from MC

USB-500 data logger from MC

One or two channels are available on USB-500/600 Series data loggers. Devices are available with temperature, thermocouple, humidity, voltage, current, or event inputs. Includes easy-to-use software to set sampling interval, alarms, start time, and other options.

Features Include -
  • USB interface for set-up and data download
  • Red and green LED status indication
  • 4-20 mA DC current loop measurement range
  • User-programmable alarm thresholds
  • Logging rate intervals between 1 sec and 12 hr
  • Stores 32,000 readings

Tuesday, May 8, 2018

Universal Process Controller - Florite

990X is an innovative and reliable microcomputer-based controller suitable for any commercial or industrial application. The instruments user configurable screw-terminal channels enable any mix of up to eight inputs and or outputs regardless of the signal type.

Universal Process Controller - Florite

The onboard data logger acquires date-time stamped measurement records based on the data logger’s selectable rates of seconds, minutes, hours, days, weeks, or months.

Universal Process Controller - Florite

Some Features
  • Graphic menu driven navigation
  • Innovative universal i/o channels details
  • Batch, blend & PID control
  • Dual totalizers per port, rates and scalar values
  • Onboard data logger details
Florite Inc.
25574 Rye Canyon Road, Suite G
Valencia, California 91355, USA.

Saturday, May 5, 2018

F090 General purpose indicator - Fluidwell

Economical loop powered general purpose indicator with large 26mm (1") high digits. Measuring unit to be displayed is selected through an alphanumeric configuration menu.

F090 General purpose indicator - Fluidwell

The configuration of the Span, off-set and number of decimals is done through software functions, without any sensitive DIP-switches or trimmers.

F090 General purpose indicator - Fluidwell

The F090 is a local indicator to display the actual process value, range and loop current. The measuring unit to be displayed is simply selected through an alfa-numerical configuration menu. No adhesive labels have to be put on the outside of the enclosure: a weather proof and user friendly
solution!

Some Features
  • Displays the actual value, measuring unit and loop current.
  • Very large 26mm (1") high digits for level.
  • Selectable on-screen engineering units for level:
  • Number of digits for actual value: 5½.
  • Piegraph indication: ten segments.
  • Auto backup of settings in EEPROM memory.
  • Rugged aluminum or GRP field mount enclosure IP67 / NEMA4X.
Fluidwell  a Dutch company has three business units: Fluidwell - Accurate Liquid Management - for displays, Fluidwell Instrumentation - Process Instrumentation - for sensor instrumentation and ProcessMonitor - Remote Location Surveillance - for remote process monitoring.

Fluidwell bv
P.O. Box 6, 5460 AA Veghel, The Netherlands.

Wednesday, April 11, 2018

Frontier FT-IR/FIR Spectrometers - PerkinElmer

Single platform for optimized near-infrared (NIR) and optimized mid-infrared (MIR) spectroscopy in a single, research-grade instrument.

Frontier FT-IR/FIR Spectrometers - PerkinElmer

Factory-fitted or upgraded as application needs change, the unique automated range changing capability allows multiple techniques to be used at the touch of a button.

 Frontier FT-IR/FIR Spectrometers - PerkinElmer

Extend your IR capabilities into the FIR region using a single optical bench. The automatic beam-splitter changeover delivers a new level of simplicity for far-IR measurements. The built-in system
flexibility is perfectly suited to demanding research environments where experiments require customized components.

PerkinElmer - Human and Environmental Health

Life and Analytical Sciences and Optoelectronics. Design, manufacture and support advanced scientific research and technology solutions. These are used in Health, safety and environmental quality Labs. Labs and Agencies that test and moderate clean water and air, ensure safety in food and toys too.

Monday, April 9, 2018

StencilLaser P 6060 - LPKF

Create state-of-the-art production of SMT solder paste stencils. It sports a space saving design, ease of use, high cutting speed and very low operating cost.

StencilLaser P 6060 - LPKF

StencilLaser P 6060 - LPKF

The LPKF StencilLaser P 6060 uses a state of the art fiber laser system with custom optics and beam delivery system, providing sidewall qualities that meet and exceed all industry standards.
Some Specs

The StencilLaser P 6060 represents the LPKF "Startline" and requires minimum setup, does not need a water chiller or high power electrical connections. It is out of the box, plugged into the wall (115 V or 230 V), setup once and producing stencils within shortest time.
  • Cutting area (X/Y) 23.6" x 23.6"
  • Maximum material thickness 200 µm
  • Laser repetition rate Max. 10 kHz
  • Axial precision ± 4 µm
  • Orthogonality 5 arc seconds
  • Repeatability ± 4 µm
From - LPKF Laser & Electronics AG

Tuesday, April 3, 2018

Vacuum meters THPS 760 - Teledyne Hastings

Teledyne Hastings Instruments manufactures Piezo Vacuum Sensors and Gauges THPS 760 and THPS 760 S known for their exceptional stability and accuracy. These can be used even in Corrosive environments.

Vacuum meters THPS 760 - Teledyne Hastings

The heart of this vacum controller is the HPM-760S module, a stainless steel measurement volume attached to a small and rugged piezo-resistive transducer on a silicon chip. The chip includes a sealed vacuum reference, a resistive bridge circuit and a temperature compensation network which
provides outstanding accuracy and stability.

Vacuum meters THPS 760 - Teledyne Hastings

When exposed to atmosphere, the instrument measures barometric pressure. Calibration is simple, no test equipment is necessary, only an accurate barometric reading is required to set the high end
    From - Teledyne Hastings Instruments
    Reliable solutions for vacuum measurement in laboratory and industrial environments.

    Friday, March 16, 2018

    HPQ-12/25-D48PBH-C - Murata Power Solutions

    Here is a  12V, 25A, Single Output Isolated DC/DC Converter, Positive polarity from Murata Power.

    HPQ-12/25-D48PBH-C -  Murata Power Solutions



    "Advanced automated surface mount assembly and planar magnetics deliver galvanic isolation rated at 2250 Vdc for basic insulation. To power digital systems, the outputs offer fast settling to current steps and tolerance of higher capacitive loads. Excellent ripple and noise specifications assure compatibility to CPU’s, ASIC’s, programmable  logic and FPGA’s. .."

    Features Include
    • Industry standard quarter brick 2.3 x 1.45 x 0.49 open frame package
    • Wide range 36 to 75 V DC input voltages with 2250 Volt Basic isolation
    • Up to 300 Watts total output power
    • High efficiency (94.5%) synchronous rectifier topology
    • Stable no-load operation with no required external components

    Tuesday, March 6, 2018

    Squirrel SQ2020 data loggers - Grant Instruments

    High performance portable data loggers which are fully configurable using the graphical LCD display and the integrated four button keypad.

    Squirrel SQ2020 data loggers - Grant Instruments

    Squirrel SQ2020 data loggers - Grant Instruments

    Feature Highlights
    • 8 to 16 universal analogue plus 8 digital inputs
    • High precision - 0.05%
    • Advanced data management to MMC/SD card or PC
    • Flexible communications USB, Ethernet, RS232
    You can Create complex schedules of logging rates, triggers and alarm outputs. The data can be Scaled and viewed in real time on the integral display or on a PC running SquirrelView or Excel.

    Grant Instruments
    Location - Cambridge, England.

    Designs and Manufactures Instruments and Equipment for scientific analysis, data acquisition and data analysis providing solutions.

    Thursday, March 1, 2018

    250 watt AC-DC power supply - Artesyn Emerson

    A 250 watt, open frame, single output AC/DC power supply in an industry standard 4 x 7 format. This chassis mount power supply has a 85-264 AC volt Wide-range input AC input with power factor correction.

    NLP250N-99S12J Artesyn/Emerson

     It is medical rated with an operating temperature range of 0 - 70 °C and up to 86% efficiency. The NLP250N-99S12J is Rohs 6/6 compliant.

    250 watt  AC-DC power supply - Artesyn Emerson

    Some Specs
    • AC Input - Wide-range Inputs:    85 - 264 AC 
    • Outputs:   - 12 Volts, 21 Amps, 250 Watts.
    • Efficiency:  -  86% 
    • Dimensions (L x W x H) -    7 x 4 x 1.5 in
    Sager Power Systems
     
    Sager Power Systems is a specialized group within Sager Electronics focused solely on power supplies. They offer over 15,000 world-class AC/DC and DC/DC standard solutions from leading power supply manufacturers, and is able to evaluate and specify standard and value added solutions.

    Friday, February 9, 2018

    Digital Humidity and Temperature Sensor SHT71

    Versatile and Replaceable Digital humidity sensor, a cost-effective component. In the SHT family the capacitive humidity sensors are fully calibrated and provides a digital output ready for interface.

    Digital Humidity and Temperature Sensor SHT71

    Each SHT7x is individually calibrated in a precision humidity chamber. The calibration coefficients are programmed into an OTP memory on the chip. These coefficients are used to internally calibrate the signals from the sensors. The 2-wire serial interface and internal voltage regulation allows for easy and fast system integration.

    Digital Humidity and Temperature Sensor SHT71

    The power consumption of around 80uW makes it ideal for battery operated devices. It measures the full span of  0-100% RH with a response time of 8 sec. The temperature range being -40 - +125°C.

    SCK is used to synchronize the communication between microcontroller and SHT7x. The DATA tri-state pin is used to transfer data in and out of the sensor.

    Sensirion is the leading manufacturer of high-quality sensors and sensor solutions for the measurement and control of humidity, and of gas and liquid flows.

    Sensirion AG
    Laubisruetistrasse 50, 8712 Staefa ZH, Switzerland.

    Tuesday, February 6, 2018

    FLIR T600-Series - Thermal Imagers

    The FLIR T640 / T620 is an ergonomic and flexible Thermal Imager with a high image quality, 640 x 480 pixels size, rich in details.

    FLIR T600-Series - Thermal Imagers

    The user interface has the now popular touch-screen technology. The T640 allows you to resolve temperature differences as small as 0.04°C.

    FLIR T600-Series - Thermal Imagers

    The position of the laser pointer is highlighted on the IR-image, which helps you associate the hot spot in the image with the physical target.

    Sketch, Text and Voice annotations. Include a sketch with the IR image of the inspected object, just draw it on the touch screen.

     FLIR T640 Features Include
    • Thermal sensitivity: <35 mk @ +30ºC
    • Temperature range: -40°C up to +2000ºC
    • 1-8x continuous, digital zoom
    • Wifi, USB, Digital Video Interface.
    • Multi Spectral Dynamic Imaging - MSX
    FLIR Systems Inc - Design, Manufacture and Marketing of Thermal Imaging Infrared Cameras.

    Friday, February 2, 2018

    Dew Point Measurements - EE35 - E+E Elektronik

    The EE35 Series is based on a functional, user-friendly housing concept and on the proven polymer humidity sensors of the HC Series. A specially developed autocalibration process enables measurements in a measurement range.

    Dew Point Measurements - EE35 - E+E Elektronik

    A specially developed autocalibration process enables measurements in a measurement range of -60...+60 degC Td with a Td measurement accuracy of ±2 degC.

    Dew Point Measurements -  EE35

    Features Include
    • Measuring range: -60...60 deg C Td - 0...60 deg C T
    • Outputs: 0-5V, 0-10V, 0-20mA, 4-20mA
    • Accuracy: +/- 2 deg C Td - +/-0.2 deg C T
    • Supply: 24V AC/DC
    E+E Elektronik Ges.m.b.H
    Development and production of Sensors, Transmitters and Instruments for measurement of relative humidity and air velocity. Humidity calibration systems.

    Saturday, January 6, 2018

    Ethernet Data Acquisition Systems - Intelligent Instrumentation

    EDAS units allow networked or intelligent standalone remote I/O - analog I/O, digital I/O, counting, temperature measurement, quadrature position sensing, and more - to monitor and control a wide range of sensors, instruments, machines, and processes over your Ethernet network, or indeed, anywhere in the world via the Internet.

    Ethernet Data Acquisition Systems - Intelligent Instrumentation

    The built-in 10/100BaseT network, including a TCP/IP stack, enables applications running on the EDAS CE unit to communicate with other computers and other EDAS CE units on a network. The EDAS CE can operate as a stand-alone system or as part of a plant- or factory- wide monitoring and control system.

    Ethernet Data Acquisition Systems - Intelligent Instrumentation

    USA manufacturer of networked data acquisition ( sensor) and data collection ( Auto ID) hardware. Daq products include the EDAS line of ethernet data acquisition modules used for hi-speed Analog, Digital and Serial IO measurement.

    Intelligent Instrumentation Inc
    6440 S. Bonney Ave Tucson, Az 85756 United States

    Thursday, January 4, 2018

    iTHX-SD from NEWPORT - Web Data Logger

    Monitor and Record Temperature, Relative Humidity and Dew Point over an Ethernet network and work on it with just a Web Browser. That Simple !

    Some Features - Web Server, Get Alarms by Email or Text Message, Record Years of Data on Popular SD Cards.

    The iTHX-SD is great for monitoring temperature + humidity in applications such as: clean rooms, computer rooms, HVAC systems, pharmaceutical and food processing and storage, hospitals, laboratories, semiconductor fabs, electronic assembly, warehousing, museums, manufacturing, greenhouses, farm animal shelters, and many more.

    iTHX-SD from NEWPORT - Web Data Logger

    iTHX-SD from NEWPORT - Web Data Logger

    "The NEWPORT iTHX-SD serves Active Web Pages to display real time readings, display charts of temperature and humidity, or log data in standard data formats for use in a spreadsheet or data acquisition program such as Excel or Visual Basic. The virtual chart viewed on the web page is a JAVA Applet that records a chart over the LAN or Internet in real time.... "

    Tuesday, January 2, 2018

    SERIES F4 Ramping Controller

    The SERIES F4 1⁄4 DIN industrial ramping temperature controller meets the requirements of the most demanding ramp soak controller processing applications.

     SERIES F4 Ramping Controller

    SERIES F4 Ramping Controller

    This ramping temperature controller features a four line, high-definition LCD interface display for quick and easy profile programming and controller configuration.

    'Watlow designs and manufactures industrial heaters, sensors and controllers - all of the components of a thermal system."

    Electronic Parts

    Interesting Posts

    Search This Blog