Thursday, May 29, 2014

USB BitScope 310 - PC Oscilloscope

BS310U is a robust general purpose USB Mixed Signal Scope and Data Acquisition device. BS310U is backward compatible with BS300U which it replaces.

USB BitScope 310 - PC Oscilloscope
 
It has 4 times as much capture buffer, a software switchable x10 and x50 analog input multiplier and AC/DC coupling, switchable 50 ohm termination, a double speed built-in USB host interface all in a physical package about 2/3 the size and weight of BS300U.

USB BitScope 310 - PC Oscilloscope

  • 100 MHz Analog Bandwidth Scope.
  • 40MS/s Logic Analyzer, 25nS capture.
  • Dual Analog Channels (4 inputs via BNC & POD).
  • 8 logic/timing channels and Smart POD.
  • Arbitrary Waveform Generator.
  • Real-Time Spectrum Analyzer.
  • Mixed Signal Data Recorder.
  • Networkable (BS310N).
  • User Programmable.
BitScopes are USB or Ethernet connected PC Based Mixed Signal Oscilloscopes. This means they capture and display one, two or four analog signals and eight logic or timing signals, simultaneously.

Wednesday, May 28, 2014

Megger - MIT200 Insulation Tester

The MIT200 series of insulation and continuity testers are ideal for testing transformers, motors, generators, switchgear, panel building, domestic appliances, power tools etc., as well as fixed electrical wiring systems.

Megger - MIT200 Insulation Tester

Megger - MIT200 Insulation Tester
  • Insulation testing to 1000 MΩ
  • Continuity testing at 200 mA down to 0.01 Ω
  • Live circuit warning (voltage display) and test inhibit
  • Digital/Analogue display
  • Alkaline or rechargeable batteries
  • -10ºC to +55ºC operating temperature
The display offers a combination of digital readout and analog display, using Megger’s patented DART display technology, which includes the benefits of an LCD displa such as robust, clear and accurate measurement, with an analog pointer response for evaluating circuit charge and discharge characteristics..
Continuity testing

Automatic continuity testing is performed at 200 mA to ensure compliance with international requirements. There is no need to press the test button. All instruments will measure up to 100 Ω on continuity, of which 0-10 Ω is performed at greater than 200 mA to meet international electrical testing requirements.

Megger - Electric Power Test Equipment

"For over 100 years, Megger has been the premier provider of electric test equipment and measuring instruments for electrical power applications."

Electronic Parts