ES series - Low noise Precision HV Supply - Matsusada

Low ripple, high stability and various remote control functions, ES series ideal power supply for such application as PMT, MCP or Microscope.

ES series - Low noise Precision HV Supply - Matsusada



Some features

• Low ripple, High Stability
• Reversible polarity available
• 1 kV to 5 kV, 6 W and 15 W
• Remote analog programmable (option)
• GPIB interface (option)

Matsusada Precision Inc
745 Aojicho Kusatsu, Shiga 525-0041 Japan

Develops, manufactures HV Precision Supplies, X-ray products and Opto-Semiconductors Systems.

MJ Series High Voltage Supply - Glassman

These are modular power supplies that can be integrated with Test Jigs, Lab Apparatus, Control and Test Panels or ATE systems.

Constant Voltage/Current Operation. Overload, short circuit, and arc protection is provided by automatic current regulation and by careful surge limiting design.

MJ Series High Voltage Supply - Glassman

Input: 105-125V RMS or 210-250V RMS, 48-420HZ single phase, 0.25 amperes. 3 position terminal block with cover provided.



Output: Continuous, stable adjustment, from 0 to rated voltage or current by panel mounted 10-turn potentiometer with 0.05% resolution, or by external 0 to 10V signals is provided.

Linearity is <1% of rated. Accuracy is 1% of rated + 1% of setting. Repeatability is <0.1% of rated.
Voltage Regulation: Better than 0.005% line and load.

Ripple: < 0.05% RMS of rated voltage at full load. Ripple is proportional to load and decreases linearly to approximately 0.01% at no load.

Current Regulation: Better than 0.05% from short circuit to rated voltage at any load condition.

Glassman High Voltage Inc.
PO Box 317, 124 West Main Street, High Bridge, NJ 08829-0317, USA.

Regulated HV Power Supplies. Designs and Manufactures high voltage power supply technology for original equipment manufacturers, laboratories and research facilities.

PS300 Series - High Voltage Power Supply - SRS

Industry standard HV Precision Lab power supplies with up to 20 kV output capability. GPIB and RS-232 computer interfaces are standard on all 10 W supplies.

All of the instruments are arc and short-circuit protected with separate programmable hard and soft current limits, making it possible to use them as constant current sources.

PS300 Series - High Voltage Power Supply - SRS



The PS310, PS325 and PS350 are dual-polarity, 25 W supplies, while the PS355, PS365, PS370 and PS375 are single-polarity, 10 W supplies. All of the instruments are arc and short-circuit protected with separate programmable hard and soft current limits, making it possible to use them as constant current sources.

Specs Include

• 1 volt resolution
• 0.001 % regulation
• 0.05 % accuracy
• Programmable limits and trips
• 0.0015 % ripple

Stanford Research Systems, Inc.
1290-D Reamwood Avenue, Sunnyvale, CA 9408, USA.

Pick and Place Bench-Top Machine - Manncorp

7722 is Ideal for start up, prototype & small production of all SMD components. The 7722 Patented, Head Mounted 'Flying Vision' for SMDs Up To 10 mm. Bottom Vision Camera for Alignment of Larger QFPs, BGAs, CSPs.

Pick and Place Bench-Top Machine - Manncorp

More Features

• Automatic Vacuum Nozzle Changer for Full Range of Component Sizes and Types
• Sliding PCB Holder for Easy Loading and Unloading of Boards Up To 310mm x 390mm
• Programming via CAD Conversion, Direct Input, or Teaching/Fiducial Recognition Camera
• Optional Dispensing Head for 6,000 Dots/Hr Solder Paste or Adhesive Application

From Manncorp

State-of-the-art machines that cover the entire surface mount production process, from prototyping to mid-volume assembly.

LE-40V Pick and Place Equipment - DDM Novastar

Benchtop pick and place model with Vision equipment offers technologically advanced, low cost solutions for low to medium volume SMT placement applications.

Accurately places a wide range of components including 0201s, LED's, BGAs, 15 mil pitch QFPs, SMT Connectors and many others

LE-40V Pick and Place Equipment - DDM Novastar

Some Specs and Features

• Vision Centering using both top and bottom cameras "on the fly"
• Placement rates up to 3000 cph
• Up to 56 tape feeders, 84-8mm tape positions with bank feeders
• Precision placement head design with closed-loop logic
• Max board size: 13.5" x 22" (343mm x 560mm)
• Placement accuracy: ± 0.001" (0.025mm)
• Max placement rate: 3000 cph

DDM Novastar

SMT and PCB OEM assembly product solutions. Products include SMT Equipment, Stencil Printers, Pick and Place and Reflow Ovens.