Donut load cell in Carbon Steel - Honeywell Sensotec

Compact, smooth thru-hole design for use in applications which require the load structure to pass through the cell. Compression only models
measure loads in capacities of 25K, 50K, and 100K lbs. The tension/compression models measure loads in capacities of 5K, 10K and 20K.

Donut load cell in Carbon Steel - Honeywell Sensotec

Special aluminum model for bolt and engine mount force sensing and other applications, You can choose tension, compression or compression only types.

Honeywell Sensotec - Load Cells Pressure Sensors

Comprehensive product lines of pressure transducers, load cells, torque cells and electronic sensor instrumentation. Sensotec - Lebow
manufactures a full line of sensors for acceleration and position (LVDT's).

Thermo Nicolet NEXUS 670 FTIR - GMI

High end optical bench which can be accessorized to do just about any analysis to the most rigorous of limits.

Thermo Nicolet NEXUS 670 FTIR - GMI

The optics are fully optimized and computer controlled for ease of use. Changing spectral range is as easy as removing an optical component and placing the new one into its position.



Features Include

• 0.125 cm-1 spectral resolution
• Continuous dynamic alignment
• Automated continuously variable aperture

GMI provides high value laboratory instrumentation and service solutions to the clinical diagnostic, biotech, & chemical analysis laboratory marketplace worldwide.

GMI - Laboratory Instrumentation and Services
6511 Bunker Lake Boulevard, Ramsey, MN 55303, United States

Minidatalogger HD207 - Delta OHM

Stable and Reliable monitoring of temperature and relative humidity. Delta Log2 software helps record and analyze the recorded data in a PC. The datalogger functions of Start, Stop, Configuration, Data Download and Logging Interval can be selectable either from instrument or computer.

Minidatalogger HD207 - Delta OHM

Logging Capacity - 240K for one channel, 120K for two channels, 80K for 3 ch.

PC Interface Through a passive optoisolated RS232 serial port, 9600 bauds
Reading Interval Selectable among 1, 5, 10, 15, 30sec, 1, 5, 10, 15, 30min, 1hour.

Typical applications are: monitoring of temperature/humidity during transportation, storage of
fresh or frozen foods, fruit, vegetable products and flowers, pharmaceuticals, sensitive and photographic products, paper, explosives, as well as laboratory activities in general.

Delta OHM - Process and Environmental Instruments

Electronic instruments for the measuring of the following parameters: Temperature, Relative Humidity, Pressure, Light, Acoustics, pH, Conductivity, Dissolved Oxygen and Wind speed.

Delta Ohm S.r.L.
Via G.Marconi, 5 - 35030 Caselle di Selvazzano, Padova (PD) ITALIA

Benchtop pH-meter model PHM240 - Analis

pH/Ion Meter performs pH measurements using multi-point calibrations on up to nine buffer solutions and direct ion measurements using a two-point calibration curve. Delivered ready to use with combined pH electrode, temperature sensor, stirrer with electrode holder and solutions kit.
Benchtop pH-meter model PHM240 - Analis

Features Include

• 6 easy-to-edit methods for pH, mV and ion measurements
• Multipoint calibration using up to 9 buffers means great accuracy
• GLP function gives you traceability and greater confidence in your results
• Measurements - pH, mV, temperature and direct ion

Measuring ranges :

• pH: -9.000 to +23.000
• mV: ±1999.9
• Temperature: -9.9 to +99.9°C
• Concentration: 0 to 999.9x10

Analytical Chemistry Laboratory Equipment - Analis
Analis is distributor of scientific apparatus, lab instruments and reagents for laboratories & manufacturer of clinical diagnostic kits

SUPERtrol-I a Multi-Function Flow Totalizer from KEP

A Flow Computer is compatible with a variety of flowmeter types in liquid applications. Can be programmed for advanced Ratemeter, Totaizer and Batcher functions. It has EZ Setup, a guided Setup for First Time Users

SUPERtrol-I a Multi-Function Flow Totalizer from KEP

Features Include -

• Rate/Total and Batching Functions
• Menu Selectable Hardware & Software Features
• Universal Viscosity Curve (UVC) and API Eq.
• Advanced Batching Features: Overrun Compensation,
• Autobatch Start, Print End of Batch, SlowFill, 2 Stage Batching

Computer Interface - RS-232 Port Standard and RS-485 Optional. Built in Data Logging, DDE Server & HMI Software.

Kessler-Ellis Products (KEP) designs, manufactures and services electronic flow instrumentation, marine-grade sunlight readable displays, industrial displays, PLC peripherals, industrial computers, counters/timers, rate meters and HMI software.

KEP - Flow Computers and HMI Software