Showing posts with label Process-Controllers. Show all posts
Showing posts with label Process-Controllers. Show all posts

Tuesday, January 3, 2017

Compact Process Controller - CM30 - ABB

Each ControlMaster has an innovative HMI at the heart of its operation, providing a common link with other instrumentation products from ABB. So, if you know one, you know them all. Operation is so easy that you will be impressed by the efficiency of it all.

Compact Process Controller - CM30 - ABB

The ControlMaster CM30 is a flexible, 1/4 DIN, universal PID process controller that boasts a clear, full-color TFT display and an intuitive operator interface that simplifies configuration and operation.

Compact Process Controller - CM30 - ABB

Fully configurable via the easy-to-navigate front panel menus or PC configuration software, the CM30 can be commissioned rapidly and then tuned via the advanced autotune capability.

Features packed in include math, totalization and a frequency input, logic, gain scheduling, split
output, valve control and real time alarms.

Tuesday, December 1, 2015

Web Enabled 4-20 mA Input Controller

RST-5000 module has been developed to provide a cost-effective solution for the monitoring of local and remote tanks or processes. It can accept any 4-20 mA output from a sensor and provide a method of calculating and reporting the level or volume of a vessel. It can also be set up to display and record user-defined units such as PSI, Temp, PH, etc. Readings are reported to a secure database on the Internet via an existing network connection.

Web Enabled 4-20 mA Input Controller
Programmed via internal web page; no special programming software required. Two programmable solid-state relays (130 mA max.) for process control or alarm points

Web Enabled 4-20 mA Input Controller

Some Features
  • Compatible with any 4-20 mA device
  • Employs Power Over Ethernet (POE)
  • 24 VDC power for sensor
  • Can use standard 24 VDC supply
  • Din-rail mounting
Automation Product Group, Inc.
1025 W 1700 N Logan, Utah 84321-1713 USA

Wednesday, June 30, 2010

ELK39 Autotuning PID controller - Tempatron

Dual red/green display that shows the set point and the process reading. 33 x 74 panel mounting. Accepts inputs from thermistors, J, K or S type thermocouples, PT100 RTD's. Analogue voltage or current inputs also can be used, this makes it a process controller.

ELK39 Autotuning PID controller - Tempatron

ELK39 Autotuning PID controller - Tempatron
Some Features
  • Autotuning PID or on/off control modes
  • Up to 4 programmable set points
  • IP65 water and dust protection
Input options
  • NTC or PTC thermistor
  • Thermocouple, PT100.
  • Current or Voltage
Control Output - 1 or 2 relay or SSR outputs and can be powered from 12Vac/dc, 24Vac/dc or 100-230Vac.

From - Tempatron

Updated Nov 2013

Tuesday, June 29, 2010

Universal Process Controller - Florite

990X is an innovative and reliable microcomputer-based controller suitable for any commercial or industrial application. The instruments user configurable screw-terminal channels enable any mix of up to eight inputs and or outputs regardless of the signal type.

Universal Process Controller - Florite

The onboard data logger acquires date-time stamped measurement records based on the data logger’s selectable rates of seconds, minutes, hours, days, weeks, or months.

Universal Process Controller - Florite

Some Features
  • Graphic menu driven navigation
  • Innovative universal i/o channels details
  • Batch, blend & PID control
  • Dual totalizers per port, rates and scalar values
  • Onboard data logger details
Florite Inc.
25574 Rye Canyon Road, Suite G
Valencia, California 91355, USA.

Wednesday, June 23, 2010

Process Controllers - Moore Industries

The economical Model 330R Process Controllers are available with alarm trip outputs that can be used for on/off control or to warn of unwanted high/low process conditions. Models are also available with an analog output signal (proportional to input) for retransmission to an analog control system, and with RS-485 communications for interface with digital-communicating DCS, PLC and PC-based SCADA systems.

Process Controllers - Moore Industries
Some Features
  • Universal input (mA, mV, V, RTD, Thermocouple)
  • NEMA 4X front panel with extra-bright 4-digit display
  • Single or dual alarm trip outputs
  • Optional RS-485 digital communications
From Moore Industries

Monday, October 12, 2009

6309POT pH ORP Controller - Global Water

The 6309POT pH/ORP Analyzer and Controller is an easy to use instrument that measures, analyzes, and controls pH, ORP, and temperature.

The 6309POT’s built-in temperature and automatic temperature compensation (ATC) functions may be used with an ATC-type sensor or with a 10K ohm thermistor.

6309POT pH ORP Controller - Global Water

The Global Water 6309POT multiparameter pH/ORP Controller measures, analyzes, and controls pH, ORP and temperature in one easy to use unit.  The pH/ORP Controller's setup and calibrations are done through a user-friendly menu that may be password protected.

Calibrations can be performed quickly and accurately with automatic buffer recognition of U.S. or European buffer sets, with the values stored in the pH/ORP Controller's nonvolatile memory.  A large backlit display on the pH/ORP Controllers provide pH, ORP, and temperature plus the current mA output and relay status.

Global Water, founded in 1990, is a manufacturer, distributor, and systems integrator of water instrumentation serving the water, wastewater, and environmental markets.

Global Water Instrumentation
PO Box 9010, College Station, TX   77842, USA.