Showing posts with label Metal-Oxide-Varistors. Show all posts
Showing posts with label Metal-Oxide-Varistors. Show all posts

Monday, August 1, 2016

Thermally Protected Suppressors - Dean Technology

CKE is a line of high voltage and high power silicon rectifiers, MOVs, selenium suppressors, silicon carbide varistors, and assemblies. These products are appropriate for a wide range of applications, and find a special fit in the power generation, resistance welding and RF power systems markets.

Thermally Protected Suppressors - Dean Technology

 Thermally Protected Suppressors - Dean Technology

22 to 50 kA, 150 to 690 VAC, 25nS Maximum

Dean Technology inc.

Dean Technology, Inc. has a long and exceptional history providing world-class products, design, and solutions for high voltage and high power markets and applications.

Dean Technology, Inc.
P.O. Box 700968, Dallas, Texas 75370, USA.

Friday, March 13, 2015

TMOV34S Thermally Protected Varistor - Littelfuse

It consists of a 34mm square format varistor element ( MOV) with an integral thermally activated element designed to open in the event of overheating due to abnormal over-voltage, limited current conditions as outlined in UL1449.

TMOV34S Thermally Protected Varistor - Littelfuse

The device has a third lead, an indicator lead, which may be used to indicate that the MOV has been disconnected from the circuit.

TMOV34S Thermally Protected Varistor - Littelfuse

The integrated configuration also offers lower inductance than most discreet solutions resulting in improved clamping performance to fast over voltage transients.

from Littelfuse

Tuesday, October 6, 2009

Metal oxide varistor disc - KOA Speer

Metal oxide varistor disc - KOA Speer

Features Include

  • Flame retardant coating (UL94V0)
  • Excellent transient voltage suppression characteristics
  • Higher surge current
  • Wide varistor voltage
  • V-I characteristics are the same in both polarity

KOA Speer Electronics -

Thick and thin film resistors, current sensing resistors and resistor arrays; thermal sensors, fuses and varistors for circuit protection; wire wound, multilayer, power .....etc.

Monday, September 14, 2009

ROV Metal Oxide Varistors Raychem Tyco

The ROV device's high current-handling and energy absorption capability, fast response, and low cost can make it suitable for use in line voltage applications.

ROV Metal Oxide Varistors Raychem Tyco

"ROV metal oxide varistors help protect power systems from damage caused by transient overvoltage faults such as lightning, power contact, and power induction. Suitable for a broad range of applications, ROV devices help protect sensitive electronic equipment from potential power surge damage by clamping high-energy, short-duration impluses."

ROV Metal Oxide Varistors Raychem Tyco

"An ROV device is a varistor fabricated using a Zinc Oxide (ZnO) powder, sintered with other metal oxide ceramics. The resulting structure is a polycrystalline ceramic that consists of distributed ZnO grains, separated by other metal oxide ceramics."

Raychem Circuit Protection Products

"A varistor is a variable resistor-a voltage dependent, non-linear device whose resistance decreases as the voltage applied across the device increases. "

ROVs can also be used to help protect electrical equipment from damage caused by large voltage or power transients on the AC Mains inputs. In a coordinated circuit protection scheme the ROV can be paired with a PolySwitch overcurrent protection device to help improve equipment reliability and fulfill IEC-61000 test requirements.