Wednesday, December 19, 2018

LD400 - DC Electronic Load - TTi

The LD400 is an inexpensive electronic load which is suitable for testing and characterising a wide variety of dc power sources. It can be used to investigate the behaviour of many different types of power source such as batteries and solar cells, as well as electronic power supply units.

LD400 - DC Electronic Load - TTi

LD400 - DC Electronic Load - TTi

The LD400 can operate at voltages below 500mV for currents up to 10 amps. At higher currents the fixed minimum resistance (typically better than 25mW) gradually raises the minimum operating voltage, but it remains below 1 volt up to 40 amps and below 2 volts up to 80 amps.

From - TTi - Thurlby Thandar Instruments Limited

Aim-TTi
Glebe Road, Huntingdon, Cambridgeshire, PE29 7DR United Kingdom

Sunday, December 9, 2018

150 W DC Electronic Load - B&K Precision

The 8540 DC electronic load is a very compact, economically priced instrument that is at home on both the bench and the production floor. Though this is an instrument in a small package, it can reliably test a 5 volt power supply to 30 amps and do it continuously.

150 W DC Electronic Load - B&K Precision

150 W DC Electronic Load

The load can operate in CC, CV or CR mode while voltage/current or resistance/power values are measured and displayed in real time, making it well suited to test a variety of DC power sources.
Features Include -

Features
  • Operates between 0-60 VDC, 1 mA-30 A (150 W maximum)
  • Two current ranges: 3 A (1 mA resolution) and 30 A (10 mA resolution)
  • Over-current and over-voltage protection
  • Short mode to simulate shorts
  • Save up to 400 instrument settings
From - B&K Precision

Wednesday, December 5, 2018

ES series - Low noise Precision HV Supply - Matsusada

Low ripple, high stability and various remote control functions, ES series ideal power supply for such application as PMT, MCP or Microscope.

ES series - Low noise Precision HV Supply - Matsusada

ES series - Low noise Precision HV Supply - Matsusada

Some features
  • Low ripple, High Stability
  • Reversible polarity available
  • 1 kV to 5 kV, 6 W and 15 W
  • Remote analog programmable (option)
  • GPIB interface (option)
Matsusada Precision Inc
745 Aojicho Kusatsu, Shiga 525-0041 Japan

Develops, manufactures HV Precision Supplies, X-ray products and Opto-Semiconductors Systems.

Electronic Parts