Thursday, September 14, 2017

Bench LCR ESR Meter 889B - BK Precision

Synthesized In-Circuit LCR/ESR Meter, useful in measuring inductors, capacitors and resistors with a basic accuracy of 0.1%. Inbuilt functions of DC/AC Voltage/Current measurements and Diode/Audible Continuity checks, study the characteristics of electronics components. Very Essential tool on any Electronics Workbench.

Bench LCR ESR Meter 889B - BK Precision

The dual display feature permits simultaneous measurements. When DC/AC voltage/current measurement mode or the Diode/Audible Continuity Check mode is selected, only the secondary display will be used to show the result of the measurement.

Bench LCR ESR Meter 889B - BK Precision

Features Include
  • Measures Z, L, C, DCR, ESR
  • D, Q, ACV, DCV, ACA, DCA and Ø
  • Test Freq. - 100 Hz to 200 kHz
  • Test Level - 1 Vrms, 0.25 Vrms, 0.05 Vrms
  • 0.1% basic accuracy
  • USB interface

Monday, September 11, 2017

CEP6000 - Multi-Function Calibrator - WIKA

"Useful for Calibration service companies/service industry and Instrument and control workshops."

CEP6000 - Multi-Function Calibrator - WIKA

In addition to the usual features It has built-in 250 Ω resistor for HART compatibility, 24 V loop power supply, compatibility with smart transmitters and PLCs,... 

Measure and source thermocouples, resistance thermometers, current, voltage, frequency as well as pressure measurement and source pulse trains is supported by the CEP6000.

CEP6000 - Multi-Function Calibrator - WIKA

Features Include -
  • Highest accuracy in class up to ± 0.015 % of reading
  • Source/Read thermocouples and RTD
  • Source ohms, current, voltage, frequency and pulse trains
  • Internal 24V loop power
From - WIKA

WIKA Alexander Wiegand SE & Co. KG
Alexander-Wiegand-Str. 30, 63911 Klingenberg, Germany

Friday, September 8, 2017

MG1000 Digital Insulation Tester - Sanwa

Hot-line state detection - Protects Meter on accidental voltage in Part/equipment on Test. (>30V). Large bolt mark - A large (lightning) bolt mark is with a buzzer sound, when HV is applied.

MG1000 Digital Insulation Tester - Sanwa

MG1000 Digital Insulation Tester - Sanwa

Other Features
  • Automatic data hold
  • Bargraph just like analog meter
  • Large display with backlight
  • Current 1.2mA @1000V/1M
  • Short Circuit Current <2mA
  • 250V - 500V - 1000V Test V
  • Max Resistance 4 G Ohms
from Sanwa Electric Instrument Co., Ltd.