Saturday, November 7, 2015

MPR03x: Proximity Capacitive Touch Sensor Controller

The evaluation kit allows a user to observe the basic functionality of the device through a couple of demo's including a pinball game and a presentation device.

The MPR03X is an Inter-Integrated Circuit Communication (I2C) driven Capacitive Touch Sensor Controller, optimized to manage two electrodes with interrupt functionality, or three electrodes with the interrupt disabled.

Kit for MPR03x Capacitive Touch Sensor Controller

MPR03x: Proximity Capacitive Touch Sensor Controller

  • KITMPR03x motherboard
  • MPR031 DIP board
  • 2+IRQ electrode daughter card
  • 3 electrode daughter card
  • 4 MPR031 cut tape samples
  • Quick Start Guide
Freescale Semiconductor is the leading manufacturer of microcontrollers, microprocessors and semiconductors.

Friday, November 6, 2015

ispMACH 4000ZE Board - Lattice Semiconductor

Using the preloaded ispMACH 4000ZE Pico Power demo design provided with the development kit, you can now test within minutes an I2C master and LCD controller interfaces in addition to the embedded ispMACH 4000ZE OSCTIMER block.

You can then build your own designs using the free downloadable ispMACH 4000ZE reference design source code, implementing these features in less than an hour.

ispMACH 4000ZE Evaluation Board

ispMACH 4000ZE Evaluation Board

Features Include
  • Pre-programmed Pico Power Demo
  • ispMACH 4000ZE device (LC4256ZE-5MN144C)
  • Power Manager II device (ispPAC-POWR6AT6-01SN32I)
  • USB mini jack socket for power, JTAG programming, and I2C interface
  • I2C, and JTAG chain
  • 4-bit DIP switch to user-defined inputs
  • 3.3V and 2.5V supply rails
  • Current and voltage sensor circuits
  • Battery or USB power source
ispMACH_4000ZE ispMACH 4000ZE Family

The ispMACH 4000ZE CPLD family is ideal for ultra low-power, high-volume portable applications.
Standby current as low as 10µA (typical) 1.8V core; Operational down to 1.6V VCC. Easy System Integration, Flexible multi-volt I/O.

5V tolerant I/O for LVCMOS 3.3, LVTTL, and PCI interfaces. JTAG In-System Programmable (ISPTM), On-chip user oscillator and timer,

Lattice Semiconductor
5555 NE Moore Ct, Hillsboro, OR 97124, USA

Sunday, November 1, 2015

CMC-99 Multichannel Indicator with PID

Compact multi-channel indicator with a colour backlit touchscreen 3.5" display. The system is based on a LINUX operating system, which is ideal for applications where simultaneous measurement and control is required.

CMC-99 Multichannel Indicator with PID

Built-in RS485 interface, Modbus RTU protocol as the standard communications. USB.

CMC-99 Multichannel Indicator with PID

Some Specs

Input Types: Configurations
  • 48 x analogue 0/4-20mA, 0-10V
  • 48 x digital inputs
  • 12 x Universal inputs V / I / RTD / TC / mV / R
  • 24 x Thermocouple inputs
  • 12 RTD inputs
Output Types: Configurations
  • 8 x analogue 0/4-20mA
  • 16 x relay (1A250V or 5A/250V) / SSR output
Impress Sensors & Systems Ltd
Regency House, 22-25 Kingsclere Park, Kingsclere, Hampshire, RG20 4SW, UK.