Monday, September 17, 2012

Cleverscope Model CS328A Oscilloscope

A USB connected, PC hosted oscilloscope and spectrum analyser. 2 analog channels, 8 digital inputs, External Trigger, 4M samples storage for each of the 2 analog and 8 digital channels,

Cleverscope Model CS328A Oscilloscope

The cleverscope CS328A is a USB 2.0 connected mixed signal PC oscilloscope which brings benefits to the user that are unavailable from traditional stand-alone oscilloscopes .

Cleverscope has complex triggering capability. Find a glitch, runt or a slow rise time problem by setting the dual triggers appropriately. Can your present scope trigger on a negative runt occurring in 0.1% of pulses?

Cleverscope Model CS328A Oscilloscope

Two 10, 12 or 14 bit analog channels sampling simultaneously at 100 MSa/sec. AC or DC coupled.

USB 2.0 Interface to the PC or 10/100Mbit ethernet, depending on option

Gain automatically set from 20 mV FSD to +/-200V FSD by choosing graph view and probe switch setting.

Offset automatically set to correspond to the selected amplitude axis view. As an example a graph with amplitude axis of 2.40 to 2.42V automatically chooses a 20mV range offset by +2.40V - good for looking at small signals in single supply op-amp applications.

Analog triggering of the waveform in view with a resolution of 1% of the display height. The analog trigger may optionally be conditioned with a low pass, high pass or noise filter.

Friday, September 14, 2012

PSoC FirstTouch Starter Kit - CyFi Low-Power RF

This intuitive starter kit allows you to evaluate the PSoC programmable system-on-chip and CyFi Low-Power RF in CapSense touch-sensing, temperature sensing, and light-sensing applications.

PSoC CY3271 Kit - Cypress

It also features the PSoC Designer IDE and Cypress's Sense and Control Dashboard.

CYFi Low-Power RF

The kit contains:
  • One PC dongle with RF
  • One RF expansion card with power amplification for long-range applications
  • One multifunction expansion card
  • Two battery packs (2xAAA and CR2032)
Cypress Semiconductor

Thursday, September 6, 2012

Web Studio - SCADA Open HMI Software

Using a browser from any Thin Client PC or Tablet .. view Status, Annunciations, Alarms and monitor online history data. Visualize data for Analysis or Tuning. Monitor real time process parameters to optimize the plant production.

Web Studio - SCADA Open HMI Software

Now plants have to be energy conscious and keep in mind the environment health, like air and water. Most important is a consistent yield of a job which is within stated quality and reliability. Worker/Plant safety is also a part of process quality and cost effectiveness..

Web Studio is a powerful HMI/SCADA software

Security: Multi-levels of application security. Easily restrict application access.

Reports: Create and E-mail concise reports in RTF, XML, PDF, CSV, and HTML file formats (via remote connection). Store reports internally, or automatically download to a remote location via new FTP configuration interface.

Scalable: Reduce development costs by easily scaling projects from one interface/operating environment to another.